One less mouth to feed, er,
charge when you use this on your setup. A solid
state DC-DC converter block generates a clean 5v
power rail for your R/C receiver and associated
interfaces while preserving ground isolation for
continued noise immunity. Now on a really sharp
PC board for easier mounting and wiring.
is 12v nominal over the range 9v to 18v.
||input is 24v nominal
over the range 18v to 36v.
Output is 5vdc at 300ma. Weighs
only 15 grams. Impact resistant
to 50g at an 11ms pulse. Simple wiring is required
but adequately explained in the included instructions.